Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.11. Settings for CUBE (Cisco CallManager Express)
These settings can be applied to Cisco Unified Border Element (CUCM) or Cisco routers with CallManager Express.
If you have selected the Cisco IOS VoIP item in the Equipment list (Figure 4.11.1), click on the Advanced settings button (Figure 4.11.1). The Advanced settings window appears as shown in Figure 4.11.11.1.
Figure 4.11.11.1
If you wish to analyze all CDR fields and you use the File Accounting method to collect CDR, turn on the Save all fields switch. It should note that this will require additional memory on the hard disk and the productivity of the serv-er will be lower. If you do not turn on this switch, Tariscope will process only fields that are used for calls rating.
If you do not turn on the No time zone correction switch, Tariscope will adjust a time from CDR to a time zone that was set on your computer.
To correctly determine the internal and external telephone numbers we recommend using a numbering plan, turn on the Use DN plans switch.
If CDR file contains information about a dialed number in the "gw_collected_cdn (103)" field, turn on the Use collected cdn switch. If you do not know this information, do not turn on the switch. Process the CDR data and check whether there is the dialed number for outgoing calls. If it is absence, turn on the switch.
If you do not wish to process unanswered calls, turn on the Ignore unanswered calls switch.
If your telephone system uses the old syslog format that does not contain the feature records, select the Don't use "feature" records for syslog CDR switch.
The Reverse Caller number and Called number switch allows you to change places the following CDR fields: Caller number and Called number.
If you want to use the username field from CDR data as the call originator, turn on the corresponding switch.
