Tariscope 4.5.x. Administrator's guide
Chapter 4 Tariscope configuration
4.13. Tariscope Observer
4.13.12. TCP client
If you select the TCP/IP client data source and click on the Data source configuration button (Figure 4.13.2), the Data source configuration window appears as shown in Figure 4.13.12.1.
Figure 4.13.12.1
In the Server box, leave the value of 'localhost' if Tariscope was installed on the same computer where your telephone system works. Otherwise, type the IP address of the telephone system.
In the Port box, type IP port number of TCP Server of the telephone system. By default: 23.
In the Login and Password boxes, type a username and password which are used to connect to TCP Server of the telephone system.
If necessary, specify the values in the Login request and Password request boxes.
Click Done to keep settings.
Tariscope 4.5.x. Administrator's guide
Chapter 4 Tariscope configuration
4.13. Tariscope Observer
4.13.11. SSH client
If you select the SSH client data source and click on the Data source configuration button (Figure 4.13.2), the Data source configuration window appears as shown in Figure 4.13.11.1.
Figure 4.13.11.1
In the Server box, leave the value of 'localhost' if Tariscope was installed on the same computer where your telephone system works. Otherwise, type IP address of PBX.
In the Port box, type IP port number of SSH Server of the telephone system. By default: 22.
In the Login and Password boxes, type a username and password which are used to connect to SSH Server of the telephone system.
In the Authentication method list, select the required method. There are two options:
- Password authentication.
- Keyboard or password authentication.
Click Done to keep settings.
Tariscope 4.5.x. Administrator's guide
Chapter 4 Tariscope configuration
4.13. Tariscope Observer
4.13.9. SFTP client
If you select the SFTP client data source and click on the Data source configuration button (Figure 4.13.2), the Data source configuration window appears as shown in Figure 4.13.9.1.
Figure 4.13.9.1
In the SFTP Server box, type a domain name or IP address of the SFTP server from which Tariscope Observer will receive files. The default name: localhost.
In the Port box, type an IP port which the SFTP server uses.
In the Login box, type a name, and in the Password box, type a password with which Tariscope Observer will be connected to the SFTP server.
In the Remote path box, type a path to a folder of the SFTP server where CDR files are located.
In the Local folder box, specify a path to the folder where the original files received from the SFTP server will be stored on the Tariscope server.
If necessary, in the File mask box, specify a template to select the required files in the remote folder. The default pattern is "*", which provides a choice of all the files in the folder.
In the Last date calendar list, select a date from which the scan of folder is started.
In the Interval box, set a time period through which Tariscope Observer will be connected to the SFTP server for checking for new CDR files. The default value is 00:10:00. This is 600 seconds.
In the Authentication method list, select the required method. There are two options:
- Password authentication.
- Keyboard or password authentication.
If you want to delete files on the SFTP server after downloading them, turn on the Delete files after processing switch.
If there is no need to store the downloaded files in the folder specified in the Local folder box, turn on the Don't store the downloaded files switch.
If CDR data were archived using 7-zip, turn on the Unpack 7-zip switch.
Click Done to keep settings.
Tariscope 4.5.x. Administrator's guide
Chapter 4 Tariscope configuration
4.13. Tariscope Observer
4.13.10. SFTP server
If you select the SFTP server data source and click on the Data source configuration button (Figure 4.13.2), the Data source configuration window appears as shown in Figure 4.13.10.1.
Figure 4.13.10.1
In the Port box, type IP port of the SFTP server to which the SFTP client of telephone system will be connected. By default: 22.
In the Login box, type a name, and in the Password box, type a password with which the SFTP client of telephone system will be connected to the SFTP server.
In the Local folder box, type the path to a folder where the SFTP client will write CDR files.
If necessary, in the File mask box, specify a template to select the required files by Tariscope Observer. The default pattern is "*". That provides a choice of all the files in the folder.
Click Done to keep settings.
Tariscope 4.5.x. Administrator's guide
Chapter 4 Tariscope configuration
4.13. Tariscope Observer
4.13.8. Serial port
If you select the Serial port data source and click on the Data source configuration button (Figure 4.13.2), the Data source configuration window appears as shown in Figure 4.13.8.1.
Figure 4.13.8.1
In the Port list, select a port number through which the Tariscope Observer service will collect CDR data.
In the following lists, specify parameters of the serial port which must correspond to PBX parameters:
- Baud rate.
- Data bits.
- Parity.
- Stop bit.
- Handshake.
If CDR format contains null characters, turn on the Discard nulls switch.
Click Done to keep settings.
