Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.20. Settings for Karel DS200
If you have selected the Karel DS200 item in the Equipment list (Figure 4.11.1), you do not need to perform any settings for CDR format of this telephone system.
Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.19. Settings for Iskratel SI3000 / SI2000
If you selected the Iskratel SI-2000 item, which is applicable to SI3000 and SI2000, in the Equipment list (Figure 4.11.1), click the Advanced settings button. The Advanced settings window appears, as shown in Figure 4.11.19.1.
Figure 4.11.19.1
If you want to store in the Tariscope database all fields of the AMA file, but not only those that are required for call rating, turn on the Save all fields switch.
In SI3000 (SI2000) the intermediate AMA records are formed every 30 minutes for calls with duration more than 30 minutes. This can lead to double rating such calls. To avoid this, turn on the Ignore calls with F6=0 (Flag Charging by AMA) and Ignore calls with F12=1 (Preventive Meter Observation) switches.
If the SI3000 settings provide a receiving of the last record for calls with duration more than 30 minutes that contains a result information about these calls, turn on the Show only last record in sequence switch, and don't turn on the Ignore calls with F6=0 (Flag Charging by AMA) and Ignore calls with F12=1 (Preventive Meter Observation) switches.
If your subscribers are connected to another telephone system and SI3000 is used as a transit telephone system, to charge the calls cost to subscribers, turn on the Processing using the numbering plan switch. Otherwise, the transit calls will not be rated.
Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.17. Settings for Farlep F-1500
If you have selected the Farlep F-1500 item in the Equipment list (Figure 4.11.1), click on the Advanced settings button (Figure 4.11.1). The Advanced settings window appears as shown in Figure 4.11.17.1.
Figure 4.11.17.1
The window allows you to select the CDR format that is used in the telephone system. There are the following options:
- Auto.
- Record296.
- Record306.
- Record476.
Select the required format and click Save.
Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.18. Settings for Informtekhnika Minicom DX-500
If you have selected the Informtekhnika Minicom DX-500 item in the Equipment list (Figure 4.11.1), you do not need to perform any settings for CDR format of this telephone system.
Tariscope 4.6. Administrator's guide
Chapter 4 Tariscope configuration
4.11 Adding a new telephone system
4.11.16. Settings for Aastra (Ericsson) MD110
Tariscope processes CDR records from MD110 only in the ASB 501 format. Therefore, for Tariscope to work correctly, you need to configure the issuance of CDRs in the ASB 501 format in the PBX.
If you have selected Ericsson MD110 in the Communication device list (Figure 4.11.2), click the Advanced settings icon. The corresponding window will appear, an example of which is shown in Figure 4.11.16.1.
Figure 4.11.16.1
This setting is required if you are using a Coordinated Dialing Plan (CDP) on your PBX. In this case, the dialed telephone number in the CDR data is in the two fields accessCode1 and dialedNumber. To correctly determine the subscriber, Tariscope must combine these fields.
In the Additional settings window that opens, you must add the numbers of routes (groups of trunks), in which the dialed internal telephone section is separated in the accessCode1 and dialedNumber fields. This can be defined in the CDR file, an example of which is shown in Figure 4.11.16.2.
Figure 4.11.16.2
In this figure, accessCode1 = 5157 and dialedNumber = 9 are highlighted in red. That is, the phone number should be 51579. This call will be made via route 040, highlighted in green in the figure. Thus, in order for the number 517579, and not 9, to be displayed as the dialed number in the Tariscope system, you need to add route 040 in the Additional settings window. Enter it and click the '+' button.
Repeat adding other routes where number splitting is performed in the data CDR. When finished, click the Save button.
If you have already processed the CDR data and added this setting, you will need to delete the CDR data and reprocess it again. Only recalculation of calls does not allow you to get such a result.
