Tariscope 4.x. Administrator's guide
Chapter 3. Tariscope configuration
3.12. Adding a new telephone system
3.12.29. NetFlow collector settings
If you have selected the NetFlow sensor item in the Equipment type list (Figure 3.12.1), click on the Configure button (Figure 3.12.1) and select the Advanced equipment parser settings item. The NetFlow configuration window appears as shown in Figure 3.12.29.1.
Figure 3.12.29.1
The window allows to specify IP addresses of network devices from which NetFlow information will be collected.
Click Add. The window appears where you should enter the IP address of source of NetFlow (IPFIX, rFlow). If you have some source of NetFlow, repeat the input for other sources.
Note. If you do not need in the Tariscope system and you need a flow collector, you can try SoftPI Flow Collector.
