Tariscope 4.x. Administrator's guide
Chapter 3. Tariscope configuration
3.12. Adding a new telephone system
3.12.11. CDR format for Cisco CallManager Express
If you have selected the Cisco IOS VoIP item in the Equipment type list (Figure 3.12.1), click on the Configure button (Figure 3.12.1) and select the Advanced equipment parser settings item. The Cisco IOS parser configuration window appears as shown in Figure 3.12.11.1.
Figure 3.12.11.1
If you wish to analyze all CDR fields, select the Save all fields check box. It should be borne in mind that it will require additional memory on the hard disk and the productivity of a server will be lower. If you do not select this check box, Tariscope will process only fields that are used for calls rating.
If you do not select the No timezone correction check box, Tariscope will adjust a time from CDR to a time zone that was set on your computer.
If CDR file contains information about a dialed number in the "gw_collected_cdn (103)" field, select the Use collected dialnumber check box. If you do not know this information, do not select this check box. Process the CDR information and check whether there is a dialed number for outgoing calls. If it is absence, select this check box.
If you do not wish to process unanswered calls, select the Ignore unanswered calls box.
To correctly determine the internal and external telephone numbers we recommend to use a numbering plan, and select the Use DN plans check box. By default, it is selected.
The Reverse Caller number and Called number check box allows to change places the following CDR fields: Caller number and Called number.
If your CallManager Express (CME) has an old syslog format that does not contain the feature records, select the Don't use "feature" records for syslog CDR check box.
